Front suspension

the figure below shows the completed coil-over suspension kit for an E24 or E28 we also make suspension kits for the E30.

the spring and shock absorber assembly is bought from D2 or BC. All other components are fabricated in our own shop.

Custom megasquirt traction control hub fabricated in house. This special hub lowers the amount of pulses to the megasquirt so its able to read the data at higher speeds

below the custom front suspension strut mounted onto an BMW E24

Below some pictures of a few of the fabrication steps involved to create a custom strut

fist an old strut is used for the suspension link interface and bearing hub. All else is cut off

next special adapter is machined from billed steel

the adapter is then press-fit into the bottom part of the original BMW strut. By using a special adapter instead of an old rusty piece of the original strut, we are able to accurately position the new coil over assembly. And maybe even more importantly to make sure the connection between old and New is as strong as possible.

below part of the New BC assembly and a special tool me made to press-fit it into its final position without damaging the BC component

After the BC component is pressed onto the adapter everything is welded all round.

.